The Bullitt drain unblocker is almost twice the density of water, therefore it sinks quickly into the blocked area. This means this powerful product can start immediately.
How to use: Introduce Bullitt as close as possible to the blockage. Pour it slowly, adding a little at a time to avoid excessive heat or pressure build-up as this could damage any pipe work or fittings. Leave to stand for 10 minutes. Once the blockage has cleared take extreme care when flushing through with water in case of a thermal reaction or splash-back.
Featured in our FAQs
Do not mix with other chemicals as violent reactions can occur.
Do not breathe the fumes when using Bullitt and allow adequate ventilation.
Avoid contact with Chrome, stainless steel, vitreous enamel, aluminium, galvanised metals and decorative surfaces as discolouration or etching may occur.
This product is sold only on the understanding that we accept no liability whatsoever for any loss, injury or damage, directly or indirectly caused, if not used for its intended purpose or if not used strictly in accordance with the instructions supplied.
Bullitt drain unblocker contains Sulphuric Acid 95-97%
CAUSES SEVERE BURNS & EYE DAMAGE
KEEP LOCKED UP AND OUT OF THE REACH OF CHILDREN
NEVER ADD WATER WHETHER HOT OR COLD TO THIS PRODUCT
WEAR SUITABLE PROTECTIVE CLOTHING, GLOVES AND EYE/FACE PROTECTION
In case of accident or if feel unwell, seek medical advice immediately (show this label where possible)
After contact with skin, wash immediately with plenty of water
UN1830 EC No 231-639-5 EC LABEL
ONLY TO BE PURCHASED BY TRADE PROFESSIONALS ONLY, ORDERS WILL BE CANCELLED IF NOT FOLLOWING THESE GUIDELINES